Olympus EPOCH 650 Flaw Detector
Olympus EPOCH 650 Flaw Detector
Olympus IMS

Olympus EPOCH 650 Flaw Detector

Pine Item #55882

The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of EN12668‑1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare™ pulser and highest number of digital filters in its class can tackle nearly any application.

The EPOCH 650 Digital Ultrasonic Flaw Detector combines Olympus’ industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 flaw detector’s blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use. 


Designed to meet the requirements of EN12668-1

PerfectSquareTM tunable square wave pulser

Full screen A-scan mode

Digital high dynamic range receiver

Thirty digital filters for enhanced signal-to-noise ratio

2 kHz PRF for rapid scanning

Knob or navigation pad adjustment configurations

Large, full VGA sunlight readable display

15+ hours of battery life

Standard dynamic DAC/TCG and onboard DGS/AVG

Multiple on-board report formats

MicroSD memory card for data transfers

Optional Corrosion Module software with Encoded B-scan

USB On-The-Go (OTG) for PC communication

Alarm and VGA outputs

Optional analog output

Quantity must be 1 or more
Equipment available for both rental and purchase
Request a Quote


Technical Specifications

USB PortsUSB On-The-Go (OTG)
RS-232 PortYes
Video OutputVGA output standard
Analog Output1 analog output (optional), Selectable 1 V/10 V Full Scale, 4mA max
Alarm Output3 alarm outputs, 5 V TTL, 10 mA
Trigger I/OTrigger input, 5V TTL; Trigger output, 5V TTL, 10 mA max
Encoder Inputs1-axis encoder line (quadrature - Corrosion Module mode only)
IP RatingDesigned to meet the standards of the Ingress Protection (IP) rating number IP67 (navigation pad version) or IP66 (knob version) per IEC 60529-2004 (Degrees of Protection provided by enclosures – IP Code). The product design was confirmed to meet the IP rating by means of Olympus internal design verification test process that occurs prior to the release of the product to production.
Explosive AtmosphereSafe operation as defined by Class I, Division 2, Group D, as defined in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL-STD-810F, Method 511.4, Procedure I.
Shock TestedMIL-STD-810F, Method 516.5 Procedure I, 6 cycles each axis, 15g, 11 ms half sine.
Vibration TestedMIL-STD-810F, Method 514.5, Procedure I, Annex C, Figure 6, general exposure: 1 hour each axis
Operating Temperature–10 °C to 50 °C (14 °F to 122 °F)
Battery Storage Temperature0 °C to 50 °C (32 °F to 122 °F)
Manuals, Data Sheets & Software